
Your Dust Remembers What the Air Forgets
We now offer ERMI and HERTSMI-2 testing. Here is what those tests measure, and why it matters who collects the sample.
Schedule an InspectionClient Newsletter: New Service Announcement · October 2026
Joseph Green
Author, JRG Mold Inspection & Testing
An air sample provides a snapshot of airborne particles in a particular location during the sampling period, and results can vary with conditions. Settled dust is different. It accumulates over time and can provide a broader historical picture of fungal material that has settled within the building. That is why we are adding ERMI and HERTSMI-2 dust testing to our services.
What ERMI actually is
ERMI stands for Environmental Relative Moldiness Index. It came out of research at the U.S. Environmental Protection Agency led by Dr. Stephen Vesper, and it runs a DNA method called MSQPCR on a settled dust sample. The panel counts 36 species. Twenty six are organisms typically found in water-damaged buildings. The other ten are common indoor molds you would expect almost anywhere. The index compares those two groups and reports a single number scaled against a national sample of U.S. homes.
Worth understanding: the method detects fungal DNA rather than determining whether material is alive or dead. This allows fungal material that may not be readily characterized by conventional spore-trap microscopy to be detected. Important limitation: ERMI was developed by EPA researchers as a research tool, and EPA does not recommend its routine use as a stand-alone method for evaluating buildings. We therefore interpret ERMI alongside building history, moisture findings, visual inspection, and other relevant environmental data.
What HERTSMI-2 is, and why physicians often ask for it
HERTSMI-2 stands for Health Effects Roster of Type Specific Formers of Mycotoxins and Inflammagens, version 2. Dr. Ritchie Shoemaker introduced it in 2011, built from the analysis of roughly a thousand ERMI results. It narrows to five organisms that showed the sharpest separation between affected patients and unaffected controls: Aspergillus penicilloides, Aspergillus versicolor, Chaetomium globosum, Stachybotrys chartarum, and Wallemia sebi.
Each one is scored 4, 6, or 10 points depending on spore equivalents per milligram of dust, and the points add into one total. Within the HERTSMI-2 framework, scores below 11, 11 to 15, and above 15 are categorized differently when evaluating environments for susceptible individuals. These thresholds are not universal health standards, and how a score applies to any individual is a question for their treating medical provider, not for us. The five span the moisture range, from species that thrive in surprisingly dry conditions to species that only appear where something stayed genuinely wet. Most labs will provide a HERTSMI-2 score alongside ERMI data from the same sample.
The sample is the test
A DNA panel is only as useful as the dust submitted to the laboratory. Collection should follow the specific laboratory’s protocol and use representative locations selected with the building history and purpose of testing in mind. Professional collection can help reduce sampling errors, avoid obvious hot spots or unrepresentative surfaces, and document where and how the sample was obtained.
A sample that is too limited, collected from inappropriate surfaces, or skewed by a single hot spot can still produce a precise-looking laboratory number. Poor sampling can therefore produce results that are not representative of the building and may lead to inappropriate conclusions.
Reading the result is its own skill
I am trained in mold and biotoxin evaluation, so the number does not land on your desk without context. A borderline score in a home with a documented roof leak and a vented crawlspace means something very different from the same score in a dry slab home with no moisture history. Training also means knowing the limits. Fungal DNA panels do not report bacterial endotoxins, Actinobacteria, microbial volatile organic compounds, or beta glucans. Depending on the building history and inspection findings, additional testing for organisms or contaminants not captured by ERMI may sometimes be appropriate.
If an insurance claim or a legal matter is even a possibility, read this twice
The lab result is only half of what carries weight. The other half is the documentation around it. When a sample is self-collected, an adjuster or an opposing expert has an easy set of questions. Who collected it? From exactly which surfaces? On what date? Was the cloth contaminated in transit? How did it reach the lab, and is that lab accredited for this method? Without documented answers, the result gets discounted long before anyone argues about the number itself.
Professional collection produces a file instead of a data point: a written sampling plan explaining why each location was chosen, photographs of the surfaces sampled, logged locations with date and time, a signed chain of custody to an accredited laboratory, and a report issued under a licensed assessor name with the methodology stated.
One more piece tends to matter when a third party reviews that file. Florida law keeps mold assessment and mold remediation separate on the same project for a reason. We perform assessment only, so we hold no financial stake in whether your building needs remediation.
To be clear about scope: none of this guarantees any particular outcome with a carrier or in a legal proceeding, and we do not provide legal advice. If you think a claim or a case may be coming, talk to your attorney or public adjuster early, ideally before the first sample is collected.
What these tests will not do
They will not locate the source. An elevated result can indicate that further investigation of the building may be warranted; finding the source requires inspection, moisture assessment, and building science. They also will not diagnose anyone. These tests describe a building, not a person, and any health interpretation belongs to a licensed medical provider.
Who should consider ordering one
- Anyone about to buy or rent a property.
- Anyone whose remediation is finished and whose environmental or medical team has recommended additional post-remediation dust testing.
- Anyone whose physician has asked for environmental documentation.
- Anyone who feels noticeably better away from the property and worse on returning.
- Any building with a history of a roof leak, a plumbing failure, a flood, or an air conditioning system that has been sweating for years.
- Anyone preparing a claim who may benefit from professionally collected and documented environmental evidence.
How to schedule
Call (904) 514-4525 or email moldconsult@jrgmoldinspection.com and we will get you on the calendar. Collection at a typical single family home takes about 15 to 30 minutes. When the report comes back, we go through it together so you understand what the number means and what your options are.
Bottom Line
Guessing is expensive. Testing is not.
Emil Haldey, Founder, DetoxME
Mold & CIRS Health Strategist with a Doctor of Pharmacy degree, Shoemaker Proficiency Partner Diplomate
One Door. Health Strategy. Independent Medical Partnerships, Coaching. Coordinated in one system.
www.detoxme.life/
For educational purposes only. Not medical advice, diagnosis, or treatment, and not legal advice. Environmental sampling describes a building, not a person. Health questions should go to a licensed medical provider, and questions about an insurance claim or legal matter should go to your attorney or public adjuster.
More from the newsletter
- Mold Is Gone. Symptoms Are Not. · Mold Education Series: Newsletter 2
Questions about your results?
If something in this issue sounds like what you are experiencing, we are happy to talk it through.
Independent by Florida law. Statute 468.8419 requires the company that inspects for mold to be a different company from the one that removes it. JRG inspects, tests, and manages claims. We never remediate. Why that protects you
Contact
- (904) 514-4525
- moldconsult@jrgmoldinspection.com
- 1139 Popolee Rd, Suite 200
Jacksonville, FL 32259 - Monday to Friday: 8am to 5pm
- Find us on Google
FL Public Adjuster License A103389 · Mold Assessor License MRSA 3122 · NORMI Certified Mold Assessor · Certified Advanced Indoor Air Quality (IAQ) Assessor
© 2026 JRG Mold Inspection & Testing. All rights reserved.
Created & Managed by Platypus Media